Vinsol AE

Vinsol AEŽ Resin
A Dark, High Melting, Aliphatic Hydrocarbon Insoluble Resin

Catalog Number Q327

Definition Vinsol AE™ resin is a dark, high molecular weight resin. This product has been formulated under U.S. Patents 5,656,733; 5,683,497, and 5,702,521 to match the chemical properties and the aliphatic hydrocarbon insolubility of Vinsol® resin. Based on these properties, Vinsol AE™ resin will be useful in a wide range of industrial applications, where Vinsol resin is used today.

Application The versatility of Vinsol AE™ resin, neat, or in soap or solution form, makes it effective in a broad range of applications, including: Adhesives, Asphalt emulsions, Inks, Primer and Surface Coatings, Paperboard and composition board, Foundry molds and core washes, Plastics, Rubber, Shoes, Phenolic resin modification, Cement (as air entraining agents), Electrical insulation, Floor coverings.

Technical Data
Acid Number 85-110

Softening Point, R&B, Cº 100-140

Compatible in solution with a wide range of plasticizers, natural and synthetic resins, cellulose derived film formers, and synthetic polymers having polar groups. Essentially incompatible with nonpolar materials such as petroleum hydrocarbon waxes and oils, and with certain plant and animal derived oils, fats and waxes.

Soluble in most oxygen containing solvents such as alcohols, esters, ethers, ketones, and phenols. Also soluble in chlorinated and aromatic hydrocarbons, but essentially insoluble in aliphatic hydrocarbons.

Packaging & Handling
Material is available pulverized in multi-wall paper bags (50 lbs, 22.7 kg net wt).

It is strongly recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

See MSDS for additional property and handling information.

Remarks
North American Regulatory Compliance: Vinsol AE™ resin is in compliance with requirements of the U.S. Food and Drug Administration (FDA) for use as specified in the Code of Federal Regulations, Title 21, subject to no limitations.

European Regulatory Compliance: Vinsol AE™ resin is in compliance with the requirements of the Bundesgesundheitsamt für Verbraucherschutz und Veterinärmedizin (BgVV) of the Federal Republic of Germany for use in food packaging and food processing operations as specified in the BgVV recommendations.

Read and understand material safety data sheet before using this product.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for test results obtained by the application of this information or the safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own test to determine the safety and suitability of each product or product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products.

Catalog Number	Q327
Definition	Vinsol AE™ resin is a dark, high molecular weight resin. This product has been formulated under U.S. Patents 5,656,733; 5,683,497, and 5,702,521 to match the chemical properties and the aliphatic hydrocarbon insolubility of Vinsol® resin. Based on these properties, Vinsol AE™ resin will be useful in a wide range of industrial applications, where Vinsol resin is used today.
Application	The versatility of Vinsol AE™ resin, neat, or in soap or solution form, makes it effective in a broad range of applications, including: Adhesives, Asphalt emulsions, Inks, Primer and Surface Coatings, Paperboard and composition board, Foundry molds and core washes, Plastics, Rubber, Shoes, Phenolic resin modification, Cement (as air entraining agents), Electrical insulation, Floor coverings.
Technical Data	Acid Number 85-110 Softening Point, R&B, Cº 100-140 Compatible in solution with a wide range of plasticizers, natural and synthetic resins, cellulose derived film formers, and synthetic polymers having polar groups. Essentially incompatible with nonpolar materials such as petroleum hydrocarbon waxes and oils, and with certain plant and animal derived oils, fats and waxes. Soluble in most oxygen containing solvents such as alcohols, esters, ethers, ketones, and phenols. Also soluble in chlorinated and aromatic hydrocarbons, but essentially insoluble in aliphatic hydrocarbons.
Packaging & Handling	Material is available pulverized in multi-wall paper bags (50 lbs, 22.7 kg net wt). It is strongly recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first. See MSDS for additional property and handling information.
Remarks	North American Regulatory Compliance: Vinsol AE™ resin is in compliance with requirements of the U.S. Food and Drug Administration (FDA) for use as specified in the Code of Federal Regulations, Title 21, subject to no limitations. European Regulatory Compliance: Vinsol AE™ resin is in compliance with the requirements of the Bundesgesundheitsamt für Verbraucherschutz und Veterinärmedizin (BgVV) of the Federal Republic of Germany for use in food packaging and food processing operations as specified in the BgVV recommendations. Read and understand material safety data sheet before using this product.